How To Install Our Security Plates
Share
How to Install a Van Security Plate in 3 Simple Steps (No Drilling Required)
Adding a security plate to your van is one of the easiest and most effective ways to protect vulnerable entry points — and the best part? You don’t need to drill, cut, or permanently modify your vehicle.
Our security plates are designed for a straightforward, stress-free installation that anyone can do at home. Here’s how it works.
Step 1: Clean & Position
Before fitting the security plate, make sure the mounting area is clean and dry.
A quick wipe with a degreaser or isopropyl alcohol will remove dirt, wax, and oils, ensuring the best possible bond.
Once clean, position the security plate exactly where you want it. Take a moment to check alignment — this is your chance to get it spot on.
Step 2: 3M Tape Holds It in Place
Each plate comes with pre-installed high-quality 3M tape. This isn’t the final fixing — it’s there to make installation easy.
The tape holds the plate securely in position while your adhesive cures, so there’s:
-
No slipping
-
No awkward holding
-
No need for clamps or extra tools
Just press firmly into place and let the tape do the hard work.
Step 3: Secure & Protected
Once the adhesive has fully cured, your security plate is locked in place and doing its job.
You’re left with:
-
Professional-grade protection
-
No drilling or vehicle damage
-
A completely reversible install if needed in the future
It’s a clean, discreet solution that strengthens your van without compromising it.
Simple, Strong, and Van-Friendly
Whether you’re protecting tools, stock, or peace of mind, installing a security plate doesn’t need to be complicated. With a bit of prep and our 3-step process, you can upgrade your van’s security in minutes — not hours.